Flash Steam Generation - SI Units

Calculate the percentage of flash steam generated from condensate at different steam pressures. Flash steam is generated when condensate leaves steam traps, and the amount depends on the pressure difference before and after the condensate trap.

Calculator

Inputs

Absolute Pressure Before Condensate Trap (kN/m²)

Absolute Pressure After Condensate Trap (kN/m²)

Results

Percent Flash Steam of Condensate-- %

Absolute Pressure Before (kN/m²)	Temperature (°C)	Pressure After 101.33 kN/m²	Pressure After 14.0 kN/m²	Pressure After 16.4 kN/m²	Pressure After 18.9 kN/m²	Pressure After 20.4 kN/m²	Pressure After 23.2 kN/m²
400	143.6		3	5.5	8.3	10.3	12.9
500	151.8	1.6	4.6	7.1	9.8	11.8	14.4
650	162.4	3.7	6.5	9.1	11.8	13.7	16.3
800	170.4	5.5	8.2	10.8	13.4	15.4	17.9
1150	186	8.7	11.5	13.9	16.5	18.4	20.9
1500	198.3	11.3	14	16.4	18.9	20.4	23.2